The FMC-NKS-401000 is a 4-channel 16-bit ADC which can provide synchronous and maximum sampling rate at 125MSPS. This module was designed based on dual-channel AD9268 ADC of Analog Device company with DDR LVDS or CMOS outputs. Because of containing a FMC-HPC connector, FMC-NKS-401000 is mechanically and electrically compliant to VITA 57.1 standard. Controlling of clock source, sampling frequency and calibration by a SPI BUS are its other features. The clock sampling can be provided from an external or internal source and then send to distribution clock unit. Additionally a trigger input for customized sampling control is available. This module can use on every carrier card which follows the VITA 57.1 standard; therefore it can have the maximum data throughput and minimum latency.

ADC's:
• 4 Channels, 16-bit Resolution, 125 MSPS
• Differential Analog Input with 650MHz Bandwidth
• Analog Input Filter Options
• SNR = 75 dBFS @ 70 MHz and 125 MSPS
• SFDR = 86 dBc @ 70 MHz and 125 MSPS
• ENOB = 12.5 Bits @ 70 MHz and 125 MSPS
• Xtalk Isolation > 95dB
• Low Power: 750 mW @ 125 MSPS
• High Performance AC-Coupled Analog Input
• 1.8 V Analog Supply Operation
• 1.8 V CMOS or LVDS Output Supply
• Flexible Analog Input Range: 1V p-p to 2V p-p
• Serial Port Control
• Pin Compatible with AD9650

Other's:
• VITA 57.1 Compliant
• FMC Interface Connector for Digital Output, Power LEDs and Single-ended MCX Connector for AIN, AOUT& EXTCLK
• Flexible Clock Tree Enables (Internal Clock, External Clock, Internal Clock with External Reference)
• Maximum Throughput
• Operating Temperature: -40°C to +85°C (Industrial)
• Physical Dimensions (L: 83.8 mm, W: 69 mm)