March 19, 2024
 

Slide 1 Slide 1 Slide 1 Slide 1 Slide 1 Slide 1 Slide 1 Slide 1
Search
Technology/Function
Form Factor
Interface
IP Core
FMC-NKS-401110

High Pin Count FMC Module
4- Channel 16-bit ADC 125MSPS
1- Channel 18-bit DUC 1GSPS
 
 
Description

The FMC-NKS-401110 is a 4-channel 16-bit ADC at 125MSPS synchronous and maximum sampling rate and single channel 18-bit DUC at 1GSPS synchronous and maximum sampling rate. This module was designed based on dual-channel AD9268 ADC of Analog Device company with DDR LVDS or CMOS outputs and single-channel AD9957 DUC of Analog Device company with CMOS inputs. Because of containing a FMC-HPC connector, FMC-NKS-401110 is mechanically and electrically compliant to VITA 57.1 standard. Controlling of clock source, sampling frequency and calibration by a SPI BUS are its other features. The clock sampling can be provided from an external or internal source and then send to distribution clock unit. Additionally, a trigger input for customized sampling control is available. This module can use on every carrier card which follows the VITA 57.1 standard; therefore it can have the maximum data throughput and minimum latency.

 

 
Features

ADC's:
• 4 Channels, 16-bit Resolution, 125 MSPS
• Differential Analog Input with 650MHz Bandwidth
• Analog Input Filter Options
• SNR = 75 dBFS @ 70 MHz and 125 MSPS
• SFDR = 86 dBc @ 70 MHz and 125 MSPS
• ENOB = 12.5 Bits @ 70 MHz and 125 MSPS
• Xtalk Isolation > 95dB
• Low Power: 750 mW @ 125 MSPS
• High Performance AC-Coupled Analog Input
• Flexible Analog Input Range: 1V p-p to 2V p-p
• Serial Port Control
• Pin Compatible with AD9650

 

DUC's:
• 1 GSPS Internal Clock speed (up to 400 MHz Analog Output)
• Phase Noise ≤ -125 dBc/Hz (400 MHz Carrier @ 1 kHz Offset)
• Excellent Dynamic Performance >80 dB Narrow-Band SFDR
• 8 Programmable Profiles for Shift Keying
• Sin(x)/(x) Correction (Inverse Sinc Filter)
• Internal Oscillator for a Single Crystal Operation
• Interpolation Factors From 4× to 252×
• Interpolation DAC Mode
• Internal Divider Allows References up to 2 GHz
• 1.8 V and 3.3 V Power Supplies

 

Other's:
• VITA 57.1 Compliant
• FMC Interface Connector for Digital Output, Power LEDs and Single-ended MCX Connector for AIN, AOUT& EXTCLK
• Flexible clock tree enables
• Direct ADC Connection to Host FPGA Ensures
• Operating temperature: -40°C to +85°C (Industrial)
• Physical Dimensions (L: 83.8 mm, W: 69 mm)


 
Block Diagram
niksoo
 
Application

- RADAR/SONAR

- Advanced automatic pilot systems (Auto Pilot)

- Diversity radio systems

- Multimode digital receivers (3G)

- GSM, EDGE, W-CDMA, LTE

 

COMPATIBILITY TABLE

Platform

Compatibility

FMC-NKS016-PCIE-B

Yes

FMC-NKS016-PCIE-A

Yes

FMC-NKS106-PCI-A

Yes

FMC-NKS-V106-A

Yes

FMC-NKS-K017-PCIe-A

Yes

VC707

Yes

ML605

Yes

 

 
Documents
Download
NIKSOO Wave Processing Technology Engineering Corporation operates in the field of Biomedical, electronics and telecommunication, base-band and signal processing, installation and lunching, consulting and software production.
  btndownload


© copy right 2012 &all rights reseved by NIKSOO Wave Processing Technology Engineering Corporation