The VirtexTM-4 FPGA SP-V4SX55-PCI-A board is configured and then plugged into a parallel PCI bus system unit. The board supports 32-bit or 64-bit PCI bus data paths. This board provides a development platform for designing and verifying VirtexTM-4 FPGA based PCI and Stand-Alone applications. The SP-V4SX55-PCI-A is intended to plug-in to a 5V or 12V keyed system board. In addition, there is also a 4-bank QSH connector on this platform which can make a high- bandwidth data transfer channel with a similar platform in parallel processing applications where two cards are plugged in a single motherboard.

• Xilinx DSP-Grade XC4VSX55/XC4VLX100/XC4VLX160 FPGA
• CI/PCI-X: 64-bit 66MHz/32-bit 33MHz PCI Add-in Card Connector
• Ethernet: Enhanced 10/100 Ethernet Full Stack Interface with RJ-45 Connector
• LVDS: 2 SAMTEC LVDS interface Connectors with up to 40 and 80 High-Speed Channels each
• Xilinx SP3-AN for PCI-based and User I/O
• Device Configuration Through On-board Platform Flash (32Mb), or Download Using Xilinx Platform Cable USB (JTAG programming interface)
• Two Independent SDRAM Banks (up to 64MB)
• User Push-button, Switches, LEDs and General Purpose I/O Header (GPIO Header)
• JTAG and Trace Debug Ports
• USB: Enhanced High - Speed USB 2.0 Interface
• PCI Clocking Support for Global and Regional Clocking Applications
• Four On-board Clock Sources
• SPI EEPROM (32Mb)
• Input Power: 5/12V PCI & External Voltage Supply
• On-board Power Regulators (5V, 3.3V, 2.5V, 1.8V,1.2V)
• Operation System Support: Windows and Linux